Decanter Centrifuge

KOSUN Drilling Decanting Centrifuge is high in recovery rate, effective in solids control and remarkable in the reduction of cost spent on drilling mud resupplying and management. It is a very sophiscated dynamic balancing machine, able to operate stably with the whirling speed ranging from 0 to 3900 and generate centrifugal force of 3000G. KOSUN DC Series Decanter Centrifuge is used to separate suspended solids ≥2μm in diameter and treat the drilling mud and fluids. It is especially effective when used oilfield service industry, industrial service industry and especially in environmentally sensitive areas.

Decanter Centrifuge Features and Benefits

1. Innovative design includes longer bowl, allowing drilling fluids to thread through more slowly, thus resulting in drier solids and finer separation point;

2. Big bowl offers big volume. It also generates high G force;

3. Stainless steel bowl, scroll, compartment are available and covered with corrosion-proof coating so as to have longer lifespan;

4. Tungsten carbide scroll points with wide spacing flights at tapered end create a finer layer of conveyed solids for consistent, uniform separation and maximum solids control efficiency.

5. German FAG or Swedish SKF brand bearings are available;

6. Electrical Components complies with SIEMENS/Schneider ATEX or IEC Ex.

7. Screw pump, centrifugal pump and feeding pump are provided to meet different applications.

KOSUN Decanter Centrifuge can meet with different requirements of mud treatment under various drilling conditions, that can do sedimentation and separation for particles more than 2 μm. After treatment, the mud can achieve ideal viscosity and proportion, results in better recycling, high efficiency, saving and environment protection.

The series of centrifuge by our company has been developed many years with the continuous improvement and optimization design, which possesses the characteristics of good result of separation and settlement, as well as large quantity, reliable work, longer life, lower energy consumption, easy maintenance, smooth operation, lower nosies, etc.

To ensure that the effective treatment result and long service life, the important parts adopts high quality stainless steel,forging material, strengthen heat treatment and strict control processing. And on each parts that easily wear take spraying wear-resisting layer and mosaic of hard alloy etc. The overflow of the main drum mouth using adjustable poling board, it can be adjusted anytime according to different sludge treatment .

To meet the requirements of the development of modern drilling engineering, KOSUN developed and equipped with the explosion-proof variable frequency control system which could adjust separation factor and drum rotational speed. By this new technology,make the centrifuge to adapt property changing of mud during the operation process, that make the treatment more effective and perfect.

A VFD (Variable Frequency Drive ) module monitors and controls both the main and back electric drives. The operator can manage bowl and scroll speeds via a touchscreen that also displays input from the various sensors, including temperature, current, rotational speed and vibration.

Decanter Centrifuge Technical Parameters:

http://www.solid-control-system.com/static/solids-control-equipment/decanter-centrifuge.html